In order to verify which front hub bearing is installed
on your 1999 Jeep, it is required that one of the front
wheel be removed.
- Once the wheel is removed, the brake rotor will
be exposed and a measurement can be taken.
- The "HAT" of the rotor will measure 2-1/8 or
2-1/4 inches in height.
- The 2-1/4 inch rotor is a COMPOSITE rotor and
will take the bearing number 513084.
- The 2-1/8 inch rotor is a CAST rotor and will
take the bearing number HA597449 (513158).
Use the illustration below as a guide to find the
correct rotor/bearing.
- A measurement of 2.125 (2-1/8 inch)
will require bearing 597449 (513158)
- A measurement of 2.25 (2-1/4 inch) will
require bearing 513084
|
1 comment:
Thanks for this this was so helpful i've been looking for simple and uncomplicated explanation and i found you!
Cheers,
Heidi
vw auto parts
Post a Comment